Towertalk
[Top] [All Lists]

Re: [TowerTalk] Gem Quad Back in Production

To: "Alan Fryer" <N3BJ@cox.net>, "Towertalk Reflector" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Gem Quad Back in Production
From: "AA6DX - Mark" <aa6dx@arrl.net>
Reply-to: AA6DX - Mark <aa6dx@arrl.net>
Date: Sun, 26 Jul 2009 19:25:32 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Alan ... use PVC pipe -- closed on one end .... put the elements in, then 
fill with varnish ... after sloshing around, pull that one out and do the 
next ...etc....  when done, you can put the remaing varnish back in the can 
... !!!  Worky worky .. 73, Mark  AA6DX
----- Original Message ----- 
From: "Alan Fryer" <N3BJ@cox.net>
To: "Towertalk Reflector" <towertalk@contesting.com>
Sent: Sunday, July 26, 2009 1:35 PM
Subject: Re: [TowerTalk] Gem Quad Back in Production


> What's the best way to refurb the spreaders with spar varnish ?  I read 
> that
> somebody "dipped" the spreaders, but I can't envision that unless a real
> long trough was used...
>
> Alan, N3BJ
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>