Date: Sat, 05 Jun 2010 08:27:27 -0400
From: Pete Smith <n4zr@contesting.com>
Subject: Re: [TowerTalk] Antenna switch isolation?
Another trick to consider is arranging the relays so that there are two
sets of open contacts between ports.
BTW, it is quite amazing how little relay capacity is really required
for a legal limit antenna switchbox - Top Ten, for example, uses a NAiS
relay that costs about $2 a pop. I have tried to break these running
really high SWRs at 1200 watts - without success.
73, Pete N4ZR
## what is the CCS current rating of the top ten relays ?? The usual deal
is they are rated at dc/60 hz.... and really drop off on 10m band.
## relays with ..'10A' contacts usually have problems on the upper
bands... somedo
some don't. A good way around that is to use a DPDT relay.. then parallel all
the contacts.
Then you quadruple the power rating.. since you doubled the current rating.
Of course the V
rating does not change.
later... Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|