Towertalk
[Top] [All Lists]

Re: [TowerTalk] 5 x conductor rotor cable ?

To: jim.thom@telus.net, towertalk@contesting.com
Subject: Re: [TowerTalk] 5 x conductor rotor cable ?
From: TexasRF@aol.com
Date: Mon, 25 Oct 2010 11:30:05 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
8A while running; how many amps to start?
 
I had to locate the 24vdc power supply at the prop pitch for a 250ft and a  
700ft long run at one time. The message here is to test with the cable 
before  installing.
 
73,
Gerald K5GW
 
 
 
 
 
 
In a message dated 10/25/2010 9:16:49 A.M. Central Daylight Time,  
jim.thom@telus.net writes:

Who  makes  5 x conductor rotor cable ?    I need 175'  for the  small PP.  
   3 x BIG wires and 2 x small ones. 
These small  PP's have a com/CW/CCW  for the dc motor which sucks 7-8 A .   
  And 2 x small wires  for the
magnetic pulses  for the digital  readout.   Something like 3 x 12 ga's  +  
2 x 20 ga's  would be ideal.  It has
to be flexible enough for a crank up.   Does it even exist ? 

Tnx... Jim   VE7RF  
_______________________________________________



_______________________________________________
TowerTalk  mailing  list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>