Towertalk
[Top] [All Lists]

Re: [TowerTalk] champion radio replacement clamp for orion 2800

To: Dick Hanson <dick@dkhanson.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] champion radio replacement clamp for orion 2800
From: Hector Garcia XE2K <j_hector_garcia@sbcglobal.net>
Date: Thu, 3 Mar 2011 14:37:17 -0800 (PST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Dick

over  any other clamp style, will go  for   
this http://www.k7nv.com/proppitch/id35.htm

have in use the same clamp for prop pitch

more professional  look and  more area of coverage  in your sprockets  (mast)
 for sure will hold much  more than the rotor you have is capable for his 
 aluminum case



 J.Hector Garcia  XE2K / AD6D
Mexicali B.C  DM22fp
P.O.Box 73 
El Centro CA 92244-0073
http://xe2k.net







________________________________
From: Dick Hanson <dick@dkhanson.com>
To: towertalk@contesting.com
Sent: Thu, March 3, 2011 2:18:31 PM
Subject: [TowerTalk] champion radio replacement clamp for orion 2800

Hello....

I am presently using four of the 2800s, ground-mounted to turn rotating
towers.
I'm having some problems getting the orion clamps to stay 'tight' on the
sprocket shafts (2" solid steel shafts).

I would appreciate hearing from anyone who has actually made the change from
orion to champion shafts.
Don't need theories....need real, live experiences.

Thank you.
Dick, K5AND
Austin, TX

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>