Towertalk
[Top] [All Lists]

Re: [TowerTalk] champion radio replacement clamp for orion 2800

To: "Dick Hanson" <dick@dkhanson.com>
Subject: Re: [TowerTalk] champion radio replacement clamp for orion 2800
From: "Mark Robinson" <markrob@mindspring.com>
Date: Thu, 3 Mar 2011 17:48:25 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I am using the Champion clamp and have had no problems with it.  I noticed 
that the Champion u bolts were a little too short to put spring washers 
under the u-bolt nuts, so I used blue loctite to make sure that the nuts 
couldn't vibrate loose. So far so good. I don't expect any problems with the 
nuts coming loose.


Mark N1UK




----- Original Message ----- 
From: "Dick Hanson" <dick@dkhanson.com>
To: <towertalk@contesting.com>
Sent: Thursday, 03 March, 2011 5:18 PM
Subject: [TowerTalk] champion radio replacement clamp for orion 2800


> Hello....
>
> I am presently using four of the 2800s, ground-mounted to turn rotating
> towers.
> I'm having some problems getting the orion clamps to stay 'tight' on the
> sprocket shafts (2" solid steel shafts).
>
> I would appreciate hearing from anyone who has actually made the change 
> from
> orion to champion shafts.
> Don't need theories....need real, live experiences.
>
> Thank you.
> Dick, K5AND
> Austin, TX
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>