Steve,
I've got 4 sections of Rohn 45 up (another 3 to go) I also have a 15
foot 2" mast that will eventually go up.
I'll try to fit it up inside the tower tomorrow and report back. I don't
think it will go but will never know unless I try.
BTW, I was thinking the same thing for my install rather than hauling it
up top.
73
Doug - K1ZO
----- Original Message ----- From: <K7LXC@aol.com>
To: <towertalk@contesting.com>
Sent: Friday, April 19, 2013 6:26 PM
Subject: [TowerTalk] Mast vs. R45G part deux
Howdy, TowerTalkians --
Tnx for your inputs but I think I need to describe what I want to do
in more detail.
There is a heavy 20' mast sticking out of the top of a pointy top
45G.
What I want to know is if by lowering the mast down thru the middle
of the
tower, if at some point you can exit the mast thru the face of a tower
section? I haven't tried it and doubt if it could be done but I
wanted to see
if someone in the group has done it or attempted it. Tnx.
Cheers,
Steve K7LXC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk