Towertalk
[Top] [All Lists]

Re: [TowerTalk] heavily rusted anchor bolt/nut

To: towertalk@contesting.com
Subject: Re: [TowerTalk] heavily rusted anchor bolt/nut
From: Adam Shirley WJ4X <wj4x@amsat.org>
Date: Mon, 07 Oct 2013 07:49:25 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Aero Kroil. Stuff works wonders. If that doesn't work, heating the nut
with a propane torch should help.

All else fails, the Acetylene wrench will remove it.

73!
 -Adam
  WJ4X

On 10/7/2013 6:56 AM, kr2q@optimum.net wrote:
> Hi...
> 
> I am changing out the T-Bar base on my TX472.  
> 
> [You may recall, my old TX472 was bent at the base of the tower during 
> H.Sandy.  The replacement tower has arrived]
> 
> I tried using my wrench to undo the 3 nuts (on 3 anchor bolts), but I wasn't 
> able to budge them.  
> 
> Then I slid a six foot long, 2" OD mast over the end of the wrench and for 
> two of them (barely rusted), they easily turned.
> 
> But one of the anchor bolts (1.125" diameter) the associated nut is heavily 
> rusted, as is the bolt.  Over the weekend, I applied Naval Rust Dissolver Gel 
> which sort of worked.  At least enough to demonstrate that the threads are 
> still in tact.  I also showered it with Liquid Wrench (several times).
> 
> But even with the 6 foot long lever arm and "cautious" pressure, I was not 
> able to budge the nut.  
> 
> I know that when nuts have "frozen" before on much smaller bolts (5/16" or 
> 3/8"), I have been able to (unfortunately) break the bolt instead of loosing 
> the nut while applying "lots" of rotational torque on the nut.  While a 
> 1.125" diameter bolt seems pretty hefty, I am concerned about doing the same 
> (yeah, sounds ridiculous)..and then I"ll really be out of luck.
> 
> Any suggestions on how to proceed?
> 
> Thanks,
> de Doug KR2Q
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> .
> 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>