Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cleaning Tarnished Wire

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Cleaning Tarnished Wire
From: Edwin Karl <edk0kl@centurytel.net>
Date: Sat, 02 Aug 2014 17:42:58 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Requires use of gloves, but I have used toilet bowl cleaner (caustic) for
this purpose, works real swell ...!

ed K0KL


On 8/2/2014 8:31 AM, Gedas wrote:
As much as I hate to admit it, at times I have been guilty of leaving rotor cables or even coax outside unprotected from the rain and snow. Later on, wanting to put it to some use and after stripping off some insulation, I find that the surface of the copper conductors have been tarnished with a nice black coating. The tarnish makes it impossible to solder to even with an acid core flux. Other than physical abrasion, does anyone have any tricks or solution/chemical that will remove that tarnish?
Gedas, W8BYA

Gallery at http://w8bya.com
Light travels faster than sound....
This is why some people appear bright until you hear them speak.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4744 / Virus Database: 3986/7967 - Release Date: 08/02/14


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>