[Top] [All Lists]

Re: [TowerTalk] Circuit Board Question

To: Jim Lux <>,
Subject: Re: [TowerTalk] Circuit Board Question
From: "Richard (Rick) Karlquist" <>
Date: Sat, 02 Aug 2014 16:07:30 -0700
List-post: <">>

On 8/2/2014 3:22 PM, Jim Lux wrote:

In a matched line, voltage and current maxima occur at the same place
because current and voltage are in phase.

But in a mismatched line that's not necessarily the case.

If the load impedance is resistive, whether 50 ohms or not, the
voltage and current maxima will occur at the same places.

Rick N6RK

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>