For Cadwelding, I'd recommend also to secure the wires from movement, as the
force generated by the combustion can shoot loose wires free, leaving you with
a useless blob of weld material and no connection to show for it.
As for using a torch, not sure: the ignition temperature of the weld material
is deliberately formulated to be very high to reduce the chance of unintended
ignition. The instructions say most flames are not hot enough, only sparks.
73, kelly, ve4xt
Sent from my iPhone
> On Nov 1, 2016, at 08:23, William K Carr III <k5tu@att.net> wrote:
>
> I am about to embark on use of cadweld for bonding my ground wires to copper
> ground rods.
>
> Has anyone used a pencil tip propane torch to light the cadweld? It would
> offer a little more distance to protect knuckles, etc.
>
> Also, I have a K0XG rotating tower base. Richard recommends large diameter
> (in my case 4AWG) stranded welding cable to ground the tower (above the
> rotating base) to the ground rods. Has anyone used cadweld on stranded
> welding cable successfully? Or, just go with a bronze clamp?
>
> Your experience and/or suggestions are appreciated.
>
> Kim K5TU
>
>
>
> Sent from Samsung tablet
>
> -------- Original message --------
> From Larry Loen <lwloen@gmail.com>
> Date: 11/01/2016 00:22 (GMT-06:00)
> To Gary <gary_mayfield@hotmail.com>
> Cc towertalk@contesting.com
> Subject Re: [TowerTalk] Cad Welding tips
>
> I like that idea of an electric igniter. Wish I had had one.
>
> Even the gun made me a bit nervous. This stuff is really hot. You do not
> want it touching you during the "exciting" moment and it is always a pretty
> 'instant" (startling) moment when it ignites. If your hand is in the wrong
> place when it ignites, zero chance to escape undamaged.
>
>
> Larry WO7R
>
>> On Mon, Oct 31, 2016 at 5:46 PM, Gary <gary_mayfield@hotmail.com> wrote:
>>
>> One shots with a battery powered igniter.
>>
>> https://www.therfc.com/cadweldnew.htm
>>
>>
>> The RFC will rent you the igniter - works awesome. Standard disclaimer
>>
>>
>> 73,
>>
>> Joe kk0sd
>>
>> [http://www.therfc.com/Images/cadweldscan2.jpg]<https://www.
>> therfc.com/cadweldnew.htm>
>>
>> CADWELD Plus - The RF Connection Home Page<https://www.therfc.com/
>> cadweldnew.htm>
>> www.therfc.com
>> CADWELD Plus. The CADWELD ONE-SHOT unit consists of the ceramic mold which
>> contains the CADWELD WELD METAL, a metal disk, a flared sleeve or sleeves
>> and cover.
>>
>>
>>
>>
>>
>> ________________________________
>> From: TowerTalk <towertalk-bounces@contesting.com> on behalf of Bob K6UJ <
>> k6uj@pacbell.net>
>> Sent: Monday, October 31, 2016 7:36 PM
>> To: towertalk@contesting.com
>> Subject: Re: [TowerTalk] Cad Welding tips
>>
>> Larry,
>>
>> Thanks for the info. I will get the igniter gun too.
>> Safety first !
>>
>> Bob
>> K6UJ
>>
>>> On 10/31/16 5:26 PM, Larry Loen wrote:
>>> You can get the one shots all over the web.
>>>
>>> This link: http://kf7p.com/KF7P/HargerUniShot.html
>> Harger® Uni-Shot - kf7p.com<http://kf7p.com/KF7P/HargerUniShot.html>
>> kf7p.com
>> What is it? Exothermic welding is a welding process for joining two
>> electrical conductors. it uses a superheated copper alloy to permanently
>> join to conductors ...
>>
>>
>>
>>>
>>> . . .includes various one-shots. Study carefully to find the exact right
>>> one, including the diameter of your ground rod. That, you can get a lot
>> of
>>> places. The real value is the little "igniter gun" farther down the
>> page.
>>>
>>> Scroll down until you find their igniter product that looks like a little
>>> gun. We had a lot of cadwelding to do and accidentally experimented. I
>>> tried a couple of other methods and frankly, as we discovered, they were
>>> dangerous. Some use ordinary sparklers to ignite these things and we had
>>> some singed knuckles when we tried that. Likewise, ordinary
>>> flint-and-steel of various sorts. Never again. Could have easily had
>> 3rd
>>> degree burns. This little "gun" version of it gets your hands just far
>>> enough away to be reasonably safe. Try and ignite it at an angle for
>>> further safety -- the stuff mostly goes straight up. But, you need a gap
>>> between you and the actual ignition.
>>>
>>>
>>> Larry WO7R
>>>
>>>> On Mon, Oct 31, 2016 at 5:12 PM, Bob K6UJ <k6uj@pacbell.net> wrote:
>>>>
>>>> I will be connecting no. 6 copper wire to 8 foot ground rods and plan to
>>>> bury the
>>>> connections. I did my homework reading Tower Talk archives and have
>>>> concluded
>>>> that I will cad weld the connections. I am a newbie at Cad Welding any
>>>> advice, and where is the best place to get cad welding supplies ?
>>>>
>>>>
>>>> Bob
>>>> K6UJ
>>>> _______________________________________________
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TowerTalk mailing list
>>>> TowerTalk@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>> TowerTalk Info Page - Contesting<http://lists.contesting.com/mailman/
>> listinfo/towertalk>
>> lists.contesting.com
>> TowerTalk is for discussion of tower and HF antenna construction topics.
>> TT members have lots of helpful information and are happy to share it.
>>
>>
>>
>>>>
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>> TowerTalk Info Page - Contesting<http://lists.contesting.com/mailman/
>> listinfo/towertalk>
>> lists.contesting.com
>> TowerTalk is for discussion of tower and HF antenna construction topics.
>> TT members have lots of helpful information and are happy to share it.
>>
>>
>>
>>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>> TowerTalk Info Page - Contesting<http://lists.contesting.com/mailman/
>> listinfo/towertalk>
>> lists.contesting.com
>> TowerTalk is for discussion of tower and HF antenna construction topics.
>> TT members have lots of helpful information and are happy to share it.
>>
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
