Towertalk
[Top] [All Lists]

Re: [TowerTalk] Help, Antenna modeling people.

To: <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Help, Antenna modeling people.
From: "Jeff DePolo" <jd0@broadsci.com>
Date: Tue, 29 Nov 2016 12:23:41 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
> So you did not use an insulator at the high voltage end of 
> the wire?  I
> never relied on rope being a good insulator. 

There does not exist a rope that remains a good insulator once it gets
wet...

In high-power broadcast, we regularly see burn-outs caused by weather-worn
fiberglass insulators that start to wick up water when it rains.  What used
to be mostly RF-transparent when dry becomes lossy when wet, with airborne
contaminants, rust/oxidation, and whatever else aggravating the condition
over time, ultimately leading to arc-over and/or mechanical failure.

                                --- Jeff WN3A


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>