I use the regular loop type arms that came with my Hy-Gain tower, but I use
a couple of feet of half inch heater hose at each arm. Have to put it on
before connectors of course. Cinch up some nylon ties to keep it in place.
Some folks just let it pile up on the ground or in a barrel, but we have
winter here and the tower is north of the house and the base is shadowed in
the winter.
Jim Rhodes
K0XU
On Jun 6, 2017 22:37, "Clay Autery" <cautery@montac.com> wrote:
> Thanks Chris! You just earned a book mark and an email inquiry! :-)
>
> ______________________
> Clay Autery, KY5G
>
> On 6/6/2017 10:28 PM, EZ Rhino wrote:
> > hi Clay,
> >
> > Can do an entire set of curved arms similar to the ones you see there
> for USTowers. Just don't get asked for them as frequently. They come
> powdercoated or if you are patient I can get them galvanized with my next
> batch. Email me direct for more info.
> >
> > Chris
> > KF7P
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|