Date: Sat, 1 Jul 2017 00:44:32 +0000
From: "Cox, Norman R." <nrc@mst.edu>
To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] Advice on Old TV Antenna Tower
< Thanks to all of you for your advice. I get the message.
The tower measures 28 inch sides at the base. The cross members are
riveted. The sections are bolted. The tower is galvanized, but shows some
rust on the top section. It is free-standing without any guys or house bracket.
We are putting together a list of possible alternatives that don't involve
climbing to the top. Maybe an idea will come up that will allow use of the
tower.
Thanks again,
Norm
KE0ZT
## It appears his tower is a 55 ft Delhi. They came in 8 ft sections..with
aprx a 4 inch overlap. Bottom section was aprx 29 inch C to C on the bolts.
Aprx 16-18 inch wide at the top. Cross pieces are Xs...and all riveted.
Thats normal for it to start the wobble at the 45 ft level. Even the bigger
Trylon free standing towers will do this...and esp if you weigh 200 lbs. The
legs are sorta quasi U shaped...with 2 bolts per leg, one above each other on
the upper sections...and 3 per leg on the lower sections.
Seen from the ground by a 2nd person, 2nd person wont see it budge. But the
fellow on the tower will swear its moving a bunch. They all do that...
unless guyed. A buddy of mine who had guyed rohn-25 at the time, freaked out
when he climbed
mine back in the mid 70s.... swore it needed guys...they dont at the 55 level.
Some sections will develop surface rust..and most dont.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|