I would also expect that the rate and quality of the “curing” would be impacted
by the ambient temperatures and humidity levels/climate at a given location.
In much of New England the temperature can easily vary by more than 120 degrees
in the course of a year – and significantly more in the great plains states.
And the climate can very enormously from the generally wet/humid East to the
desert SW. This has to have an impact.
73
Bob KQ2M
From: jimlux
Sent: Thursday, April 26, 2018 9:06 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Adding Expanding Foam inside boom
On 4/26/18 3:34 AM, john@kk9a.com wrote:
> I'm not sure how you would completely fill a 12' piece of tubing with the
> foam and I think it would have the potential to trap water. I like to
> keep my booms completely open (no end caps).
>
> John KK9A
>
the other problem is that the foam may not "cure" properly in a sealed
(or nearly sealed) container. The tesla coil community has fooled with
this to make large toroids by doing stuff like filling a truck tire
inner tube, or a ring of expandable duct, with the foam, in an attempt
to "rigidize" it.
I think the take home from all those experiences is that "it depends on
the brand and type of foam"
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|