TRLog
[Top] [All Lists]

[Trlog] While they're fresh...

Subject: [Trlog] While they're fresh...
From: olinger at bellsouth.net (olinger@bellsouth.net)
Date: Mon Mar 3 14:25:34 2003
CTL and left SHIFT are NOT together on all keyboards. Think maybe something on 
the side of the keyboard, hooked up to the footswitch, IS the route to go. Not 
sure what single key could be preempted for this function.

Guy, K2AV

> 
> From: Pete Smith <n4zr@contesting.com>
> Date: 2003/03/03 Mon AM 11:06:22 EST
> To: "Ron D. Rossi" <rrossi@btv.ibm.com>
> CC: trlog@contesting.com
> Subject: Re: [Trlog] While they're fresh...
> 
> At 10:53 AM 3/3/03 -0500, Ron D. Rossi wrote:
> 
> >Gee I don't know...life is too short for QRP ;) =;-)
> >Seriously I would need to know what the Cabrillo "standard" is for decimal
> >power. Should the entry be 0.5 or 0d5 or what? I can get TRLog to accept or
> >generate the correct value when known.
> 
> I expected that -- Tree reads this reflector, which is why I put this issue 
> near the front.
> 
> > >
> > >Worked a lot of splits on 40 and 80.  There is an anomaly in the Alt-N
> > >command.  If you enter a 3-digit integer for the split transmit frequency,
> > >it is displayed in the lower corner of the screen as (for example)
> > >"253X253".  What's the "X" for and why is the frequency displayed
> > >twice?  If you enter a decimal transmit frequency ("253.5" for example), it
> > >then displays a truncated version of the "xxxXxxx".  Looks like it is
> > >running out of room.
> >
> >Remember you are using the BETA!! I had a debug line which I forgot to turn
> >off which shows up when you enter a frequency to send the radio to. I did not
> >notice I had left it in until running with a beta this weekend :)
> 
> Argh, you're right.  I did forget because it ran so well.
> 
> 
> > >
> > >I also found that if I was moving around 10M multiplier hunting, and enter
> > >a frequency in the call field, there is a small bug.  Entering "729" moves
> > >the receive frequency to 28729, but entering "729.3" moves my Mark 5 to
> > >".729.3"
> >
> >Yes this is the way it works. I don' know if I can make it better. The logic
> >is that if you enter three or fewer digits then it is assumed you are moving
> >within band and they are decoded as KHz. If you enter more than three it is
> >assumed to be MHz.
> 
> 
> OK, that's fine.
> 
> 
> > >
> > >The way the exchange field is parsed in this contest is a PITA for the few
> > >people who give you either a different power on your second QSO with them
> > >or a signal report other than the expected 579.  Either case winds up with
> > >garbage in the received power field in the log that has to be fixed with
> > >Alt-E.  I know this is tough but there ought to be a way at least to
> > >improve it (requiring a space between, and then assuming an order, for
> > >example, to tell which is which).
> > >
> >
> >An RST override needs to be the first entry on the line for this contest an
> >any others where RST and numbers could be entered as part of the exchange. I
> >do see that everything after an initial number gets logged as the
> >power...spaces and all. I can see about changing that. What will likely 
> >happen
> >is that the last number entered with be the power and the first number 
> >entered
> >will be the new RST.
> 
> That would work fine.  It is the "spaces and all" part that was giving me 
> trouble, but I wasn't smart enough in real time to figure it out.
> 
> 
> 
> > >When you dupe-check a station with the spacebar, or when you tune across
> > >him using the bandmap, sometimes the station's call and the initial
> > >exchange both appear in the call field.  Sometimes, calling the station
> >
> >This is normal and if you hit enter to start logging all is okay. How did the
> >SO2R stuff work with the call getting loaded automatically from the bandmap?
> 
> Perfectly, from what I could tell.  Oh, while I remember it, one other 
> thing, maybe a beta issue.  The DVP ON message kept getting replaced by the 
> default CW speed of 35 WPM -- only on the screen.  Program functioning 
> wasn't affected at all.  It appeared that if I did an Alt-M to CW, then 
> another back to SSB, the DVP message would come up and stay till the next 
> band change.
> 
> 
> > >does not put the initial exchange in the exchange field.  I can't yet
> > >characterize this well enough to find, I suspect -- will experiment some 
> > more.
> >
> >Please do. The initial exchange worked great for me this weekend.
> 
> For me too, I believe, except for this.  I'll try to replicate this one.
> 
> 
> > >
> > >And finally, does anyone else yearn for a key on the keyboard that would
> > >serve as a momentary-contact "PTT ON" switch?  With SBDVP, I was able to
> > >work many S&P QSOs without ever opening my mouth, but when running I had to
> > >find and stamp on the footswitch to say the other station's call.  That was
> > >the physically most difficult part of this contest for me, and if I ever
> > >operate another phone contest seriously I want another way to do it, either
> > >in hardware or software.
> >
> >CTRL-SHIFT!
> 
> Yes, but I still would prefer a single key, in lieu of 2.  Imagine having 
> to hit two keys simultaneously 2500 times in a weekend (or 9000, if you're 
> WP3R).  In a pinch, I will attach a microswitch to the side of the keyboard 
> and mechanically parallel it with the footswitch.
> 
> Isn't it Control-Left Shift?
> 
> 
> 73, Pete N4ZR
> The World HF Contest Station Database was updated 23 Feb 03.
> Are you current? www.pvrc.org/wcsd/wcsdsearch.htm
> 
> 
> 
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
> 


<Prev in Thread] Current Thread [Next in Thread>