WriteLog
[Top] [All Lists]

Re: [WriteLog] a couple v12 notes from last weekend

To: Jim Rhodes <jim@rhodesend.net>
Subject: Re: [WriteLog] a couple v12 notes from last weekend
From: Ron Lodewyck <rwlodewyck@gmail.com>
Date: Tue, 17 Oct 2017 07:45:45 -0700
List-post: <mailto:writelog@contesting.com>
I had same thing happening with the K3 subreceiver audio going to a second
instance of MMTTY but it would display (decode) the main receiver audio as
well as the subreceiver audio. I just assumed (and this may still be the
case) that I was getting crossover from a poor sound card and/or cabling
from the K3/0 Mini headphone jack to the PC Line In.

I don't recall this ever being a problem in the past, but I can't be
certain.

If I just listen in the headphones, I do get clear separation of left Main
Receiver and right Subreceiver audio.  But I need to do more testing to
isolate the problem.

I am using Writelog version 12.21 and the K3/0 Mini connects via a Remote
Rig 1258MkII interface to a K3.

73,
Ron N6EE


On Tue, Oct 17, 2017 at 5:44 AM, Jim Rhodes <jimk0xu@gmail.com> wrote:

> I also had an issue (hardware, software, wetware - I don't know). The
> Rittyrite window for sub receiver was using audio from main receiver, not
> the sub. With phones on I I could tune sub across signals that absolutely
> did not show in the sub window, but tuning main receiver signals showed in
> both windows. I even loaded an old log from a different contest and it
> acted the same. Checked configurations of the MMTTY setups over and over,
> they were assigned to correct channels. When I get time I will try running
> 2 MMTTY Windows in without WriteLog and see how they act.
>
> Jim Rhodes
> K0XU
>
> On Oct 16, 2017 20:34, "Jeff Stai" <wk6i.jeff@gmail.com> wrote:
>
> > Maybe these are related to the poor Makrothen module, but here they are
> in
> > case y'all have any feedback. I recently
> >
> > I have keyboard shortcuts for the basic exchange programmed near the
> enter
> > key, so that it is an easy and quick tap-tap to send TU and then enter.**
> > I've been doing this with no issue in v11.
> >
> > In v12, if tap the TU key and then enter too fast, the TU gets cut off
> (as
> > if I had hit ESC). This happened on two different PCs.
> >
> > The other one is just weird. This is a K3s, on the sub RX tuned into a
> > signal, MMTTY for the main window. I noticed that even when I wasn't
> > transmitting on any radio that I could see my own CQ printing in the sub
> RX
> > window. This would be for several seconds after stopping transmit. One
> > could suppose someone was trying to mess with me but the sub was on a
> > completely different frequency...
> >
> > Then I also had the issue of no SCP highlighting in the main windows,
> noted
> > in another thread.
> >
> > Thanks - jeff wk6i
> >
> >
> >
> > --
> > Jeff Stai ~ wk6i.jeff@gmail.com
> > Twisted Oak Winery ~ http://www.twistedoak.com/
> > Facebook ~ http://www.facebook.com/twistedoak
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>