Hi Tony, I use 751A with UX14 for many years. Set Baud rate to 1200, Transceive off, check that address is set for 28 (1C). Try is with version before 6.70 first (defaults in earlier versions work OK
I have the same problem here and my request to implement the feature should be somewhere on the wish list for a long time. Anyway my approach is to have the mode bit somewhere on the parallel port. T
Hi Pete, I did try it in the past but it does not work on 1.5 Ghz Pentiun IV It is not the CW that gets messed up. It is rather the recording (I have used RacAllPro) The only exclusion was when I was
I would like to second Bob I2WIJ as far as TCP/IP LAN is conserned. LAN cards are a lot cheaper and easier to find nowdays then additional serial ports or USB to COM converters. The network continue
Just tried it and found that: 1) Escape does not exit S&P 2) SBDVP message does not getting interrupted when pressing Esc (use to work that way) 3) Pressing F1 or any other F button does not sent SBD
1) Rescore is a good macro but when done on WAE log it drops out all the references to QTC.dat file. 2) I wish when rescore is done the communication with radio is disabled. Otherwise the radio keep
something Hi Arturo, You only need to reorganise you contest files. Keep every contest in its own directory and that's it. My directory structure is as follows. In the directory CONTESTS the first l
This depends upon cluster software not TRlog 73, Igor UA9CDC _______________________________________________ Trlog mailing list Trlog@contesting.com http://lists.contesting.com/mailman/listinfo/trlo
I had similar problem with my WAE log. It turned out to be different time in the log entry and QTC file. Please check that the line referring to QTC.dat entry exactly the same as the information in t
in I desided not to bother as soon as I learn they need copy of my license to be sent by mail. That will take too long... Just wonder why do they not except scanned copies which can be submitted via
I meant to write ""accept"" :) UA9CDC ADIF _______________________________________________ Trlog mailing list Trlog@contesting.com http://lists.contesting.com/mailman/listinfo/trlog
Noticed that same problem during CQWW. It has started with the latest versions (6.75 I think). It only happens when you close down TR and then start it again. The cure I found is to start TRwith resc
Do not think so... Run TR in Win98 dos window here so disk caching is enabled. It is something related to restart.bin update ahen you restart TR after exiting it. Igor UA9CDC ________________________
That is what I do... Igor UA9CDC _______________________________________________ Trlog mailing list Trlog@contesting.com http://lists.contesting.com/mailman/listinfo/trlog
Pete, I can't say I did it with any sound card but I have two desktop computers at home, one Dell Latitude CPX notebook and one no brand notebook and all run well enough with TR and SBDVP. Having sai
Yes, all the latest versions do work with Orion. A friend of mine UA9CLB is using one. Just define the radio as Orion and no need to set baud rate etc. 73, Igor UA9CDC _______________________________
That is funny Rich, I often telnet to KL7G cluster :) 73, Igor UA9CDC clusters _______________________________________________ Trlog mailing list Trlog@contesting.com http://lists.contesting.com/mail
Here is my example: radio one type = IC765 radio one receiver address = 44 radio one control port = serial 1 radio one baud rate = 1200 As you see you also need to supply radio one baud rate if it is
Tod, I am not familiar whith JBI product but from you description it appears that it is very cheap and simple interface that uses RTS signal as power supply. I once built such interface(CI-V converte