The messages on the bottom of my screen have disappeared, including Dupe. I'm using CTwin Ver 10.4.001. Same for all files, old and new. Was tough in CQWW. I had to look at SCP or Station windows
Dennis thanks, Iran the DOS version for a lot of years. I switched to CTwin a few years ago and have been running it both with win 98 and XP OS without problems. This disappearing message problem jus
Thanks, Great mind think alike. I was just looking at online manual additions and found the "-reset" switch, which fixed the problem. It puts all the window positions back to default. Now I can recon
The substitute command didn't work for me when I tired it a while back. Also tired to assign the drive with same results. Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.
Yes, it's the same it CTWIN Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.org _______________________________________________ CT-User mailing list CT-User@contesting.co
Bob, You answered my question with your references to the built-in functions. Cheers, Dan Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.org -- On Mon, 5/17/10, Bob Wils
Try another RS-232 cable if you have the right radio(s) selected and it still doesn't work. Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.org __________________________
CW STATUS is always on my CTWIN screen. Try the following if you haven't done so already: Change the speed and see if the STATUS comes back, Change to keyboard mode abd see if the STATUS comes back.
Hey, How about sharing those new files! Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.org _______________________________________________ CT-User mailing list CT-User@c
1. It is my understanding that the TS940 setting at 38400 baud using CTWin 10.xx under XP provides proper TWO-WAY communication of frequency and mode, including split freqs. Please let me know if tha
Thanks Dave and all others that replied. I feel kind of stupid. I didn't even look. Cheers, Dan Z Dan Zeitlin - K2YWE Annapolis, Maryland South Shore ARC - K3AU http://danzee.org Beware of Redbox! Th
I discovered a fixed 7 hour time error in a significant portion of my CT daily log. The error affects contiguous QSOs in the middle of the log. I have considered: 1. Converting to ASCII, fixing affec
Why not set up dual boot with XP or DOS? Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.org _____________________________________________________________________________
don't at least the top two on the list use MMTTY as the actual RTTY engine? Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.org __________________________________________
Is there any other known instance of this error in any other contests? Thanks, Dan Z Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.org _________________________________
I have been using CTWIN under XP with an FT-1000MP and an FT-990 withwithout any problems for a great while. I just added an IC-706MKIIG and put together a CI-V (CAT) interface. I can control the rad
CT will correctly read the radio when CT first loads up. The initial band, mode, and freq (in the bandmap) are correct. After that no more read data, jsut commands to the radio. The plot thickens. I
I took a look at what CTWin is sending out the RS-232 port. On initially loading, it issues commands to the radio to set both VFOs and read the frequency and mode. That's why CTWin correctly displays
Thanks a zillion! Makes sense. Setting TRN to "ON" did the trick. I think that's what Jim had in mind when he said a setting to make the radio "babble." I don't know how I missed that. I thought I
Dave, - What might have caused the original error? Is this a sign that the internal clock in the laptop experienced a hardware error (can you tell I'm not computer-fluent?)? * Can't tell, and probabl