I need a WriteLog SO2R expert or two. As I get braver with SO2R, there are times I would like to use tell other station where I am QRV on another band. Ihad assumed the %Z imbedded command would allo
Hi AK0A Your problem reads a bit vague to me. What is coming up not responding? The Router, WriteLog, MMTTY or Windows? There are downloadable WriteLog setup documents under the microHAM Router drop
Al, One STEREO sound card will easily support SO2R, that is how I do it here. I am not at my radio computer at the moment, but the secret is in the MMTTY set-up. Look for an option to choose both, le
There is no RIT zero software command with the Icom rigs. <dag-nab-it!> Eric - Ve3gsi _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contes
Hi Joe and Group, With my ProIII (CW or RTTY), when I send 1A 05 65 00 and read back the results I do see 00 The same as, when I send 1A 05 65 01 and read back the results I see 01. What it does do,
Ron/Gang What is the entry to turn 'local' off? I see nothing new under [Entry]. TNX, Eric - Ve3gsi _______________________________________________ WriteLog mailing list WriteLog@contesting.com http:
Chris, If you have not tried - do not use AUTO ANYTHING in the set up - baud or address. 73 Eric _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://l
Nick, The answer is yes! I have sent you the basic steps in a direct email. Eric - VE3GSI _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.co
On an off chance does anyone have a NM QSO Party module for WL - Beta or otherwise? Please feel free to mail me direct, Eric - VE3GSI. ve3gsi@canada.com ______________________________________________
Hi Guys, A few years back, I use to get a 'RTTYRITE MFC Application Error has occurred', only when I CLOSED WriteLog. At the time I believe the problem was because of two .dll files with the same nam
Dana, In the past I have had a Blue Screen crash with a COM port if I selected the PK-232 and it was configured to use a USB port pseudo port. It is possible to accidently select the PK-232 when sett
Hi Mack, Somehow I missed your original post. I see Joe offered one good suggestion. With the Icom rigs, AUTO baud or speed is not a good choice with WL as with some other programmes. The other thing
If you have doubts on ability of the ears to decode high speed and type the calls, just check out the hi-scores at: www.dxatlas.com/morserunner These top boys are only cruising at 60 to 70 wpm (+) a
Hi Steve, It is used to start the RTTY (RttyRite) window. If the RTTY window is already open nothing will happen. When a station runs SO2R, or other multiple radio configurations it is a good way to
Hi Gary, Did you ever get an answer on the CWJF Manchester Mineria contest module? I have asked if this module could be added to WL and to date have seen no such addition. I think it would be a good
Gary, First, just checking, do you have the mkII or the mkIIg? There was an addendum that came with the IC706-mkIIg and the new address is 58H. Like I said, just checking. Also, a lot of ground has b
Al, The only time I have seen a problem of crashing the PC with FSK on a serial port, if, and only if I had accidently choose a PK-232 Modem and configured it to a virtual serial port. You can check
Ray, With Rttyrite the text does not scroll, the red line you are seeing is a just to indicate the where the last printed text is. Remember during a contest you need only to click on the first letter
Tony, Unless things have changed, my notes show with MTTY, Writelog only supports to COM8. I will admit my notes have NOT been updated for quite sometime and the programmers may have made changes. Un
Larry, Under Writelog's Setup|Ports make sure POLLING for the port selected is 'checked', while there make sure Comm PTT = No as it is not needed. Do make sure you select a fixed port speed ie.: 9600