Amps
[Top] [All Lists]

[AMPS] Where to read Reflected Power

To: <amps@contesting.com>
Subject: [AMPS] Where to read Reflected Power
From: jono@enteract.com (Jon Ogden)
Date: Tue, 28 Sep 99 12:56:04 -0500
>>
>--snip-------------
> 
>> Now take and apply this to RF.  Your VSWR is actually not constant along
>> the coax but will have peaks and nulls all along the coax.
>---snip-----------
>
>Jon,
>The VSWR is constant along a mismatched line.  The voltage varies along
>the line and VSWR is the ratio of Emax to Emin.

I stand corrected.  You are correct!  It was late last night and I was 
quite tired and also didn't have my textbooks at home to verify what I 
was saying!  Yes, the voltage along the line varies and the SWR is the 
ratio of those peaks and valleys.

And in the real world, the losses in the TX line cause the SWR to 
decrease as you have a greater length of line.

Thanks for the correction.

73,

Jon
KE9NA


--------------------------------------------------------------------------
The Second Amendment is NOT about duck hunting!


Jon Ogden

jono@enteract.com
www.qsl.net/ke9na

"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>