Mark says:
> RF current flows on the outer surface of the 6mm tube but
>can't flow on the surfaces of the 1mm wires on the inside of the
>twisted bundle.
>In fact it's confined to 6 thin lines on the outside, at 50MHz my
>guess is the Q drops about a factor of 3-4
Then how does bunched conductors, let alone Litz, work?
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|