[Amps] MRF150 based 1500 watt amp design/cost

[w2fca at cs.com (w2fca@cs.com)]

"Phil Clements" <philk5pc@tyler.net> wrote:
>Don't forget the output filters, Dan.
>There must be at least 5 low pass filters to cover 1.8-30 mhz.
>No big deal, just a lot of torroids, large RF rated caps, and 1500
>watt relays to switch them in and out. The filter assy. is the largest
>board in my Henry SS-750.

The filters on the CCI page are rated at 300 watts. Are there any designs 
readily available that would handle 1500?

Frank
W2FCA