Fwd: Re: [Amps] MRF150 based 1500 watt amp design/cost

Amps

Fwd: Re: [Amps] MRF150 based 1500 watt amp design/cost

To:	<amps@contesting.com>
Subject:	Fwd: Re: [Amps] MRF150 based 1500 watt amp design/cost
From:	wlfuqu00 at uky.edu (Bill Fuqua)
Date:	Thu Mar 6 10:26:29 2003

>
>
>
>If you want to experiment here is a soldstate plasma generator 1200watts
>The guy sent me pictures. It is only $10 right now but only 1 hour left.

Inside 4 amps driven by one with power splitter on board.
One large combiner for the 4. No pics of the power supply.

>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=4683&item=2513177182
>I have too much stuff to be buying this.
>73
>Bill wa4lav

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] MRF150 based 1500 watt amp design/cost, (continued) [Amps] MRF150 based 1500 watt amp design/cost, Billy Cox [Amps] MRF150 based 1500 watt amp design/cost, Pete Smith [Amps] MRF150 based 1500 watt amp design/cost, Tom Rauch [Amps] MRF150 based 1500 watt amp design/cost, jeff millar [Amps] MRF150 based 1500 watt amp design/cost, Phil Clements [Amps] FS: 600 WATT SOLID STATE PA UNITS, Norman Hockler [Amps] FS: 600 WATT SOLID STATE PA UNITS, Phil Clements [Amps] FS: 600 WATT SOLID STATE PA UNITS, Norman Hockler [Amps] MRF150 based 1500 watt amp design/cost, Bill L. Fuqua [Amps] MRF150 based 1500 watt amp design/cost, w2fca@cs.com Fwd: Re: [Amps] MRF150 based 1500 watt amp design/cost, Bill Fuqua <=

Previous by Date:	[Amps] Unknown 2m 2x4cx250b design?, Dfmich@aol.com
Next by Date:	[Amps] Use of Manual T/R Switches, Tom Rauch
Previous by Thread:	[Amps] MRF150 based 1500 watt amp design/cost, w2fca@cs.com
Next by Thread:	[Amps] tube life, william kessinger
Indexes:	[Date] [Thread] [Top] [All Lists]