out jack. That is in a lot of amps, if the relay was after
the meter
> , then a relay contact could cause a false reading if it
> were dirty and messing with the impedance. I'd about be
> the meter is out of adjustment somehow though.
If a relay contact was so dirty as to change SWR reading, it
would be melting. There is no way to change SWR by a bad
series connection with considerable heat at high power.
It almost certainly is meter adjustment, the wiring style,
or the meter design.
73 Tom
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|