To: | "amps@contesting.com" <amps@contesting.com> |
---|---|
Subject: | Re: [Amps] 230v wiring question |
From: | "Jim Brown" <jim@audiosystemsgroup.com> |
Date: | Tue, 24 Apr 2007 12:16:55 -0700 |
List-post: | <mailto:amps@contesting.com> |
On Tue, 24 Apr 2007 12:24:45 -0500, Ken Bessler wrote: > Is 12/2 enough or will I see voltage drops #12 is just fine. It's rated for 20A, and there will be relatively little IR drop in such a short length. You MUST, however, pull a dedicated safety ground (green wire) with that line, and connect it to the third (round) pin on the outlet and to the ground bus in the breaker panel. 73, Jim Brown K9YC _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] Surface Cleaning Tarnished Aluminum, k7rdx |
---|---|
Next by Date: | Re: [Amps] 230v wiring question, Mike McCarthy, W1NR |
Previous by Thread: | Re: [Amps] 230v wiring question, Robert Bonner |
Next by Thread: | Re: [Amps] 230v wiring question, Mike McCarthy, W1NR |
Indexes: | [Date] [Thread] [Top] [All Lists] |