According to "Triode" software by KD9JQ, with 4K as the output power and
with 4KV on the anode, the input impedance is almost exactly what you
recollected.
It varies from 50-54 ohms over the freq range of 1.8-14MHz, which are the
only freqs I ran.
73
Dick, K5AND
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Bob Maser
Sent: Wednesday, April 16, 2008 12:53 PM
To: AMPS
Subject: [Amps] 3CX3000A7 input impedance
A friend of mine is building up a 3CX3000A7 amp and asked me what the input
impedance is. Seems that I used 50 ohms when I built mine but I'm not sure.
The Eimac tech sheet says a 3x3 running in AB2 cathode driven will have an
input impedance of 50 ohms. Can anyone verify that for me?
Thanks,
Bob W6TR
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.523 / Virus Database: 269.23.0/1381 - Release Date: 4/16/2008
9:34 AM
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|