At 06:57 AM 13/03/2010, Carl wrote:
>No offense Alek but the masses on here dont believe in voodo science as they
>do on the forum you just arrived from. You might want to search the archives
>on the subject.
Ha ha. No offense taken Carl. You won't offend me in a hurry. Number
1, I'm married. Number 2, I live by the principle that if you strike
a match, then don't cry to mummy (you say mommy) that the fire is too
hot. I lit the match so I gotta take the flame.
You are probably right about voodoo science but all that is quite
irrelevant to me, because I know from my own experience, that they do
actually work. I'm satisfied with that.
>Larry, for a real suppressor that works get a Xicon 50 Ohm 5W MOX resistor
>and a pair of 100pf 500V silver micas for each suppressor from Mouser.
>
>Lay a resistor and the original (or a clone) in parallel. Connect a cap
>between them at both ends. Wire it dead bug or on perf board.
You said a pair of SM caps for each suppressor. Do you put the 2 caps
in series to give you 50pF @ 1kV and then put that in parallel with
the coil and resistor?
If so, then I am interested enough to try it out on my Clipperton L
which is also being done up. I just got a Ameritron plate choke in
the mail this week so I'll be installing that next weekend, along
with the .01uF at the base. I have a bundle of 50 Ohm, 5W MOF
resistors and 100pF SM caps, so I will do up the suppressors as well.
Cheers, Alek
VK6APK
>Carl
>KM1H
>
>
>----- Original Message -----
>From: "Alek Petkovic" <vk6apk@bigpond.com>
>To: "Larry" <w6nws@arrl.net>; "Amps" <amps@contesting.com>
>Sent: Friday, March 12, 2010 4:57 PM
>Subject: Re: [Amps] Clipperton-L parasitic suppressors
>
>
> > G'day Larry,
> >
> > At the risk of offending the masses, don't worry what value they are.
> > Just go to http://www.somis.org and scroll down to
> > <http://www.somis.org/Price-Info.html>Price List--Information Sheet
> > and order yourself a kit for 4x572B. Much simpler and much better.
> >
> > If you still wanna know the value of the original, they are as you
> > said. In the circuit they are R6 and R7 and the parts list quotes
> > them as being 100 Ohm, 2 Watts.
> >
> > Cheers, Alek
> > VK6APK
> >
> > At 05:33 AM 13/03/2010, Larry wrote:
> >>I have cleverly filed my Clipperton-L doc. I am hoping someone can
> >>help. The parasitic
> >>suppressor resistors have broken. I believe they are 100 ohm 2W
> >>composition. Can
> >>anyone confirm the value? I am not sure what caused the breakage at
> >>this point.
> >>
> >>73, Larry W6NWS
> >>_______________________________________________
> >>Amps mailing list
> >>Amps@contesting.com
> >>http://lists.contesting.com/mailman/listinfo/amps
> >
> >
> > http://www.qrz.com/db/vk6apk
> > http://www.qrz.com/db/vk6py
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
http://www.qrz.com/db/vk6apk
http://www.qrz.com/db/vk6py
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|