Amps
[Top] [All Lists]

Re: [Amps] New 2 PA design

To: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
Subject: Re: [Amps] New 2 PA design
From: "Hsu" <hsu4qro@gmail.com>
Date: Sat, 16 Oct 2010 06:27:14 +0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
http://www.microsemi.com/micnotes/APT9502.pdf and 
http://www.microsemi.com/micnotes/APT9701.pdf
----- Original Message ----- 
From: "Hsu" <hsu4qro@gmail.com>
To: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
Cc: <amps@contesting.com>
Sent: Saturday, October 16, 2010 6:21 AM
Subject: Re: [Amps] New 2 PA design


>I remnember that APT(now microsemi) have an AN, it is transformerless design, 
>Class C ,1kW output.
> ----- Original Message ----- 
> From: "Hsu" <hsu4qro@gmail.com>
> To: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
> Cc: <amps@contesting.com>
> Sent: Saturday, October 16, 2010 6:19 AM
> Subject: Re: [Amps] New 2 PA design
> 
> 
>> If use ARF1510/11 worked in SEPP or ARF1505 in P-P configattion, 
>> transformerless are possible, only needs a PFC unit.My teacher in the 
>> university, built a PFC unit what the out put volt below the input's. 
>>       73!Hsu
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>