CT-User
[Top] [All Lists]

[ct-user] CTDOS/Windows98

To: <ct-user@contesting.com>
Subject: [ct-user] CTDOS/Windows98
From: alsopb@gloryroad.net (alsopb)
Date: Mon, 01 Jul 2002 18:21:21 +0000
Zoli HA1AG provided a lead to solve this one.

IN THE BOOK SUPPLIED under the Attaching and External Monitor, there
is a command which will expand the screen's size for a DOS display.
(Hmm, why would I look there?)

at the C> PROMPT TYPE:  PS2 HVEXP ON

The CT screen nicely fills the LCD display. The purist may not be
thrilled with the aspect ratio of the characters but they are big and
readable-- unlike before. 

One can apparently go to the ThinkPad Configuration utility and
accomplish the same thing.

This command is "sticky".  After machine shutdown and restart, it
still provides a full display screen.

The suggestion to start CT with a -vga only squeezes 50 lines in the
small box.

Thanks guys.

73 de Brian/K3KO

Bob Naumann - N5NJ wrote:
> 
> That would be an IBM question - not a CT question.
> 
> ----- Original Message -----
> From: "alsopb" <alsopb@gloryroad.net>
> To: <ct-user@contesting.com>
> Sent: Monday, July 01, 2002 10:25 AM
> Subject: Re: [ct-user] CTDOS/Windows98
> 
> > I think the replies to this missed the issue.
> >
> > On my Thinkpad with WIN98 when one boots to DOS, the entire DOS screen
> > occupies a block in the center of the screen.  I want DOS to occupy
> > the entire screen just like it does on a normal monitor.  It
> > apparently is putting the 640x200 DOS screen in the center of the
> > 1024x768 SVGA display.
> >
> > de Brian/K3KO
> >
> > Hank Kohl K8DD wrote:
> > >
> > > At 7/1/02 10:15 AM +0100, Buffham, Ian wrote:
> > > >I have a DOS version of CT which works just fine under Windows 95.  I
> have
> > > >just acquired a laptop for use in a contest which has Windows 98.  CT
> runs
> > > >OK with this but the problem is that the display only occupies about
> one
> > > >third of the screen.  Does any one have any ideas as how to make it
> occupy
> > > >the full screen?
> > > >Regards Ian G3TMA (Also G3TMA@aol.com)
> > >
> > >  From a DOS window, press ALT-Enter for full screen mode.
> > > Although I'd run it from a Command Prompt (DOS Mode- press F8 during
> boot).
> > >
> > > 73   Hank
> > >
> > > _______________________________________________
> > > ct-user mailing list
> > > ct-user@contesting.com
> > > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > > http://lists.contesting.com/mailman/listinfo/ct-user
> > _______________________________________________
> > ct-user mailing list
> > ct-user@contesting.com
> > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user

<Prev in Thread] Current Thread [Next in Thread>