Karlnet
[Top] [All Lists]

Re: [Karlnet] New board - specifications & pricing

To: <karlnet@WISPNotes.com>
Subject: Re: [Karlnet] New board - specifications & pricing
From: "Larry Yunker \(Cyber Broadcasting\)" <leyunker@cbcast.com>
Reply-to: karlnet@WISPNotes.com
Date: Mon, 20 Jan 2003 11:53:29 -0600
List-post: <mailto:karlnet@WISPNotes.com>
What cards will this board support?  Prism 2.5 and Lucent? What about 5.X
cards??  any support for those?

----- Original Message -----
From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
To: <karlnet@WISPNotes.com>
Sent: Monday, January 20, 2003 11:51 AM
Subject: RE: [Karlnet] New board - specifications & pricing


> pricing for the 1 port board - $150 w/out power supply or card
> pricing for the 2 port board - $185 w/out power supply or card
>
> offlist if you want to be put on the beta list
>
> specs below...
>
> Full Version WPAP+ / WPBASE+
> SPECIFICATIONS
> CPU ST-PC Elite @ 133MHz
> BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
> RAM 16MB on-board DRAM for programs and data.
> Storage 512KB on-board Flash ROM (BIOS and
> KarlNet firmware); Linear Flash support for factory loading.
> Data Interface
> PCMCIA / CARDBUS sockets
> 3.3/5V Selectable operations
> 10/100mbps Auto-sense Fast Ethernet
> Power Input 9V to 15V DC in, either from the Input Jack, or Power over
> Ethernet input from the RJ45 port supports the proposed IEEE 802.3af PoE
> Standard.  Power consumption ~9W fully loaded.
> Second Ethernet port may be used as a PoE injector when DC power is
applied
> to first Ethernet Port.
> Additional Features
> Fully Industrial Strength Chipset
> Reset / Reload Pushbutton Switches,
> Hardware Watchdog Timer,
> Programmable GPIO register for Input/Output,
> FCC Class A Certification
> Compact Flash Socket for Future Upgrades
> Piezo Buzzer
> Software control for header for external fan (voltage supply, 5 volt / 1
AMP
> or sync current)
> Speaker output header
> LEDs for Board Power status, Link/ Activity for Ethernets & Link /
Activity
> for PCMCIA / Cardbus sockets
> Form Factor 3.8" x 5.2" x 1.1" basic board size, with dual-side major
> component placement, the same basic mounting holes as the RG-1000.
> Operating Temperature
> -30°  to 55° Celsius (° to 131° Fahrenheit) predicted temperature range,
> with non-condensing humidity.
>
> Lower cost Version WPCPE+
> SPECIFICATIONS
> CPU ST-PC Elite @ 133MHz
> BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
> RAM 16MB on-board DRAM for programs and data.
> Storage 512KB on-board Flash ROM (BIOS and
> KarlNet firmware); Linear Flash support for factory loading.  Compact
Flash
> socket for future software upgrades.
> Data Interface
> PCMCIA / CARDBUS sockets
> 3.3/5V Selectable operations
> 10/100mbps Auto-sense Fast Ethernet
> Power Input 9V to 15V DC in, either from the Input Jack, or Power over
> Ethernet input from the RJ45 port supports the proposed IEEE 802.3af PoE
> Standard.  Power consumption ~9W fully loaded.
> Additional Features
> Fully Industrial rated Chipset
> Reset / Reload Pushbutton Switches,
> Hardware Watchdog Timer,
> Programmable GPIO register for Input/Output,
> FCC Class A Certification
> Compact Flash Socket for Future Upgrades
> Piezo Buzzer
> Software control for header for external fan (voltage supply, 5 volt / 1
AMP
> or sync current)
> Speaker output header
> LEDs for Board Power status, Link/ Activity for Ethernets & Link /
Activity
> for PCMCIA / Cardbus sockets
> Form Factor 3.8" x 5.2" x .9" basic board size, with dual-side major
> component placement, the same basic mounting holes as the RG-1000.
> Operating Temperature
> -30°  to 55° Celsius (-22° to 131° Fahrenheit) predicted temperature
range,
> with non-condensing humidity.
>
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Bob Hrbek
> Sent: Monday, January 20, 2003 11:32 AM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] New board
>
>
>  When, where, how much?
>
>  We've been told January, available from some vendors and that you weren't
>  sure what the price would be.
>
>
>  Come on guys....you are putting nails in your coffin here.  We are
> deploying
>  new sites....trying to decide what to do.  Silence isn't helping you on
our
>  list of pros and cons.......
>
>  -bob
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>



<Prev in Thread] Current Thread [Next in Thread>