I ask because I have never really seen it for sure.
We have one access point where only in the evenings or on weekends as a rule,
we will have periods lasting as long as 30 minutes where some clients fall
offline (usually random ones). This ap was on channel 10, but I switched the
ap and all clients to channel 4, seems to behave the same on either channel.
If I go into station entries in configurator (radio stats) these are the
figures:
During normal times: (21 clients on)
noise from -45 to -72
signal from -45 to -65
During the outages (of the clients still online)
noise from -58 to -60
signal from -45 to -52
I am wondering if it is interference of some sort or an amp going flaky. We do
have a 1 watt amp on this AP, but it's a two piece and I don't want to go up
and replace it if it's not the problem.
Can anyone offer any advice? This problem is driving me batty!
|