One client hogging the whole network. No bandwidth limiting/shaping in
place I'm guessing....
Find the Kazaa kid and put him at 128Kbps transmit/receive and see if that
helps.
At 08:35 PM 6/3/03 -0500, you wrote:
I ask because I have never really seen it for sure.
We have one access point where only in the evenings or on weekends as a
rule, we will have periods lasting as long as 30 minutes where some
clients fall offline (usually random ones). This ap was on channel 10,
but I switched the ap and all clients to channel 4, seems to behave the
same on either channel.
If I go into station entries in configurator (radio stats) these are the
figures:
During normal times: (21 clients on)
noise from -45 to -72
signal from -45 to -65
During the outages (of the clients still online)
noise from -58 to -60
signal from -45 to -52
I am wondering if it is interference of some sort or an amp going
flaky. We do have a 1 watt amp on this AP, but it's a two piece and I
don't want to go up and replace it if it's not the problem.
Can anyone offer any advice? This problem is driving me batty!
Roger Boggs
|