Hi Sylvan
Y
----- Original Message -----
From: "VE5ZX" <ve5zx@hotmail.com>
To: "Bernie van der Walt" <bernie@internext.co.za>; "K4RO Kirk Pickering"
<k4ro@k4ro.net>; <trlog@contesting.com>
Sent: Friday, November 03, 2006 3:35 PM
Subject: Re: [Trlog] New TR684.ZIP
> >Set your baud rate to 1200 and not 4800. Your DBS2 should start working
> >again.
>
> Bernie, I don't understand this reasoning. The Icoms work fine with both
> TR679 and TR684 with the baud rates set to 4800. Tr listens and controls
the
> rigs with no problems The band output information is presented on LPT1 and
> LPT2. The band output work fine with TR679 but not with TR684.
>
> How would changing the baud rate to 1200 effect the output on the parallel
> port?
>
> tnx
> Syl
>
> Sylvan Katz - VE5ZX
> Saskatoon, SK
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|