Hello Dennis
I use the TT 708 mic with Orion II and I=get excellent audio reports.(on 80
meters)
My settings are mic gain 50 and internal mic gain 9.5.
I have no distortion and the ALC flickers all right.
Hope this helps.
73
Fotis SV8ING
GREECE
http://www.geocities.com/sv8ing/Fotis_SV8ING.html
--- Στις Δευτ., 05/05/08, ο/η Dennis Bryant <brya5984@bellsouth.net> έγραψε:
Από: Dennis Bryant <brya5984@bellsouth.net>
Θέμα: [TenTec] 708A MIC setting
Προς: tentec@contesting.com
Ημερομηνία: Δευτέρα, 5 Μάιος 2008, 20:20
Good afternoon all,
As many of you heard yesterday on the TenTec net, I have a question about my
708A microphone used with my Orion II.
I have to set the mic gain at 70 on 20 meters and 90 on 10 meters in order to
get the red ALC light to twinkle and them only with my mouth on the mic. The
manual suggested setting is 60.
My 706 makes the ALC blink at a mic setting of 40 on all bands. I have over 30
years of acting experience in amateur theater so I don't have a problem
with projecting my voice.
I do know there is an internal mic gain (it was set at 2.0 and I increased it
to 2.5). I am a little leery of using that gain too much because of the warning
in the manual.
Does anyone have a suggestion before I contact TenTec?
Dennis, N4MUS
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
___________________________________________________________
Χρησιμοποιείτε Yahoo!;
Βαρεθήκατε τα ενοχλητικά μηνύματα (spam); Το Yahoo! Mail
διαθέτει την καλύτερη δυνατή προστασία κατά των ενοχλητικών
μηνυμάτων http://login.yahoo.com/config/mail?.intl=gr
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|