Jeff -
I took the existing cable and cut it off 3" from the connector. I then
put Anderson Power poles on the end so I have a 3" pigtale with the Ten
Tec connector on one end and power poles on the other. I plug any cable
with power poles into that and it's compatible.
I never have to worry about finding the odd connector. It also takes
some of the strain off the Orion connector, a good idea since some have
had problems with the way the back end of the connector is mounted
inside the Orion.
73 de K1ESE
John
Jeff KB2M wrote:
> Does anyone know the Digikey (or equivalent) part number for the power cable
> connector. I need to make up a new longer power cable so I need the end that
> would be on the cable. Thanks in advance...
>
> 73 Jeff kb2m
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|