Well. Wiggling is not permanent. It seems as though sometimes I measure
the 120V on the 2 white wires and sometimes not. Unless someone has a
better suggestion, I plan to solder a bridge to the white wires on the
terminal strip inside the case. Then I can proceed to chase the voltage
through the xformer and onto the voltage control board. That terminal
strip is pretty gnarly and not that I don't trust it, but.....
BTW, this is the power supply for my backup rig. I can power the Omni
on my existing supply that drives the Jupiter. It would be nice to have
a supply for the Omni when needed, and I have the 280. Might as well
make it work.
John -- WA1JG
WA1JG@nsradio.org
On 3/10/2011 5:40 PM, Richards wrote:
On 3/10/2011 3:24 PM, John Graves wrote:
Well, so far I proved that wiggling is legit way of fixing some things.
After wiggling a few wires I now have 110 AC on the white wires
--------------------------------------------------------------------------------
YES... but "jiggling" is ill advised, and contraindicated....
;-)
Good luck on the rest of the fix.
============================ K8JHR ===========================
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|