Hi Wade,
That would be much appreciated! I've got the final module out and
opened up as I type. :)
Nothing obviously wrong - nothing looks burnt, caps don't look like they
swelled, etc...
Now looking in my parts stash to see what I have to replace those two
problem caps anyways. :)
thanks much,
ben, kd5byb
On 7/14/2012 8:42 AM, wade staggs wrote:
> *Sorry did not read the post about no low ohm resistance to ground. When I
> get home this evening, I can scan the bias and final sections for you.
> Those Caps are a problem waiting to happen anyway..............*
> *
> Wade/KJ4WS*
>
> On Sat, Jul 14, 2012 at 8:09 AM, Ben Hall <kd5byb@kd5byb.net> wrote:
>
>> Hi Wade,
>>
>> Thanks for posting that - I had a copy from somewhere, but couldn't
>> remember where! Bet I got it from QSL.net. Bookmarking it this time,
>> heh heh heh.
>>
>> thanks,
>> ben, kd5byb
>>
>> On 7/14/2012 7:49 AM, wade staggs wrote:
>>> *Probably will not help with the repair but, here is a .pdf that you may
>> or
>>> may not have.*
>>> **http://www.qsl.net/tentec/manuals/585.pdf
>>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|