Topband
[Top] [All Lists]

Re: Topband: K6STI low noise receive loop

To: James Rodenkirch <rodenkirch_llc@msn.com>
Subject: Re: Topband: K6STI low noise receive loop
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Tue, 02 Oct 2012 16:22:33 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On 10/2/2012 12:43 PM, James Rodenkirch wrote:

And, in my case, Don, I simply need to put up an antenna that's:

 a) more efficient than my vertical and b) fits within the confines

 of my property....having any noise cancelling or nulling is a plus

 but not as important as a and b (b being the huge limiter)


You might try something simple like a low dipole.  For me, it
usually beats a vertical, and is foolproof if you couple to it
with an RF transformer (not a transmit balun or common mode choke). Doesn't have to be full size on 160. Omnidirectional. A good first RX antenna. Possibly could be a 40 meter or 80 meter cloud warmer
that happens to receive on 160 as well.

I am planning to put up 40 and 80 meter dipoles at right angles
at a height of 30 feet (five 30 foot pieces of 2 inch irrigation
pipe as supports).  It will work locals on 40 and 80 as a cloud
warmer and receive on 160 as a low dipole.  I have found that
a 30 foot high dipole is indistinguishable from a 60 foot high
dipole as a 160 meter receive antenna (these were full size
160 meter dipoles).

Rick N6RK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>