| To: | topband <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: Covered /bare antennn wire |
| From: | Mike Waters <mikewate@gmail.com> |
| Date: | Thu, 15 Nov 2012 11:56:48 -0600 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Why not prevent the static buildup in the first place? I use 33K resistors from each wire to ground. Schematic is at http://www.w0btu.com/Beverage_antennas.html . The components in parallel with the 33K resistors are 90 volt gas discharge tubes, and the resistors are to prolong the life of those GDTs. 73, Mike www.w0btu.com _______________________________________________ Topband reflector - topband@contesting.com |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Topband: Covered /bare antennn wire, Bruce |
|---|---|
| Next by Date: | Topband: V84SMD, f6bki |
| Previous by Thread: | Topband: Covered /bare antennn wire, Bruce |
| Next by Thread: | Re: Topband: Covered /bare antennn wire, Mike Waters |
| Indexes: | [Date] [Thread] [Top] [All Lists] |