Yes, that's right, Carl. No close neighbors, radio stations, etc. But this
house is a prolific generator of RFI, and I have been getting power line
noise lately.
I'm not saying that there's not a case for suppressing common mode as you
and others suggest.
I do have a problem here lately with RFI from an electronic fluorescent
ballast on 160 (10 feet from where I operate the radio), and I'm not sure
how it's getting into my NE Beverage. Big #43 beads on the ballast leads
didn't fix it. But that's another story.
73, Mike
www.w0btu.com
On Sat, Mar 1, 2014 at 8:08 PM, Carl <km1h@jeremy.mv.com> wrote:
> But arent you in the boonies Mike with little common mode noise? I notice
> a few others with lots of acerage do the same but when I was enroached upon
> on both sides I just followed ON4UN's lead. It works ...
>
>
> I don't ground the shields at the transformers. The only place they are
>> grounded/connected together is inside the shack, at the switchbox.
>>
>> My beverage coax is mostly laying on the ground. A little of it is buried.
>>
>> 73, Mike
>> www.w0btu.com/Beverage_antennas.html
>>
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|