Towertalk
[Top] [All Lists]

[TowerTalk] RE: Crappy PL259's

To: <towertalk@contesting.com>
Subject: [TowerTalk] RE: Crappy PL259's
From: sm2cew@telia.com (Peter Sundberg)
Date: Mon, 22 Oct 2001 19:57:23 +0200
I never solder the shield to the connector. I just cut the outer jacket off
and screw the connector on to the shield and solder the center conductor.
Been doing it for 30 years and have not had a problem no matter what
connectors I use. 
This way they are also VERY easy to re use.

Ready to be flamed.. :-))

73/Peter SM2CEW
www.qsl.net/sm2cew

At 17:28 2001-10-22 , you wrote:
>
>When I do solder connectors to the shield, I use a big soldering 
>gun and hit the connector near the holes with a grinder or file before 
>soldering.
>
>I never have a problem soldering when I do that, no matter who's 
>connectors I am using.
>73, Tom W8JI
>W8JI@contesting.com 
>
>List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
>Trylon Titan towers, coax, hardline and more. Also check out our self
>supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com
>
>-----
>FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
> 



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>