Lloyd,
I had to replace the original screws that connect the loading coil to the
tubing in each loading
coil assembly (LCA) on my Cushcraft 402CD. I split the original heat shrink
and trimmed it back
only far enough to expose the screw connections. I cleaned each connection and
used a new stainless
screw to replace the original. Instead of using new heat shrink to
weatherproof the connections I
used alternating layers of a good grade of electrical tape, Scotch 33 or 88,
with "liquid tape".
73, Ted W4NZ
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Lloyd
Bell
Sent: Monday, December 03, 2007 12:32 PM
To: towertalk@contesting.com
Subject: [TowerTalk] 40-2CD
Hello All
I'm trying to replace some traps and I'm wondering what kind of heat shrink to
use and a supplier?
It looks like the old heat shrink had some kind of mastic on the inside.
Any help would be appreciated.
Tnx Lloyd K5ZO
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.13/1165 - Release Date: 12/2/2007
8:34 PM
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|