Towertalk
[Top] [All Lists]

Re: [TowerTalk] US Tower gearbox

To: towertalk@contesting.com
Subject: Re: [TowerTalk] US Tower gearbox
From: Les Kalmus <w2lk@bk-lk.com>
Date: Mon, 5 Sep 2016 20:49:39 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
John,

Also, check this: http://www.mcmaster.com/#mobil-shc-630-oil/=141jcfz

Good price.

Les W2LK


On 9/5/2016 2:55 PM, Bob K6UJ wrote:
John,

I don't know the capacity of your TX455 gearbox but it would not be over one quart.
My HDX589 gearbox takes exactly one quart.
As you probably already know it is important to flush the old gear lube out with the synthetic lube you are going to use. The original lube and the synthetic are not compatible. I would order two quarts. That should work fine for flush and fill.
Here's a supplier that I have used.
https://www.zoro.com/mobil-mobil-shc-630-circulating-iso-220-1qt-120272/i/G0943074/

Bob
K6UJ


On 9/5/16 10:27 AM, John Holmes wrote:
I was reading with interest the explanations of the lube needed for US
Towers. My TX455 has been up for five years now and, while I have lubed the grease fittings regularly, I've never changed the oil. I want to do this now using SHC630 as K6UJ noted. However, before I order this, how much would you recommend I order? Would 2 quarts be enough to both flush the gear assemble
and refill it? I'd hate to have too little on hand after draining.
Thanks for your help.
73,

John W9ILY


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>