I used a shop vac to pull a string through 210 feet of 4" PVC. Worked
great!
On Mon, Aug 28, 2017 at 3:02 PM, Tom Osborne <w7why1@gmail.com> wrote:
> I have seen some questions about having a broken line in a conduit and how
> to run a new one.
>
> I worked for a short time at a vacuum cleaner place, and one great way we
> found to pull a line though PVC pipe was to tie a rag on the end of the
> line and insert it into the end of the pipel Then go to the far end and
> put a hefty vacuum cleaner on the pipe and suck the line with the rag tied
> to the end through the pipe. Then you can tie that line to a bigger pull
> line and pull it through. Works pretty slick.
>
> If the run is too long, though, it won't work as there won't be enough
> volume of air going through the pipe. 73
> Tom W7WHY
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
-----------------------------------------------
*Michael Murphy - KI8R*
mike@ki8r.com
www.ki8r.com
*614-371-8265 (cell)*
-----------------------------------------------
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|