And, if you start a log, enter 3 or 4 Qs, delete all the Qs, and then
enter more Qs in the same log does it behave as it did for me (carries
forward the information but marks the Q as a dupe)?
73
On Tue, 4 Mar 2003 19:20:22 -0500 "WA9ALS - John" <wa9als@starband.net>
writes:
> You have it correct, Larry - Mine behaves the same. If there are
> less than
> 3 intervening QSOs, the name of a previously-worked station
> auto-fills. If
> there are 3 or more intervening QSOs, then the name does not
> auto-fill. Oh
> well, should be easy for Wayne to fix, but not critical for the
> contest. 73
>
> ----- Original Message -----
> From: "Larry L Lindblom" <llindblom@juno.com>
> To: <wa9als@starband.net>
> Cc: <Writelog@contesting.com>
> Sent: Tuesday, March 04, 2003 6:56 PM
> Subject: Re: [WriteLog] Sprint module
>
>
> >
> > I think I sort of figured out what is going on. The couple of
> times I
> > tested it, I started with the radio turned off so the Qs were
> marked B
> > (bad). I delete those Qs and started again using the same log.
> Doing it
> > that way it behaves for me as I described (copies the name and
> QTH
> > forward to the next Q) but marks the Q as a dupe. But, if I start
> from
> > scratch it behaves as you and Don stated (does not copy name or
> QTH
> > forward but counts the allowed dupes per contest rules as valid).
> It is
> > interesting that again for me if I entered the same call twice
> > consecutively it carried forward the information but with three Qs
> in
> > between it does not.
> >
> > So I guess you can have it either way but you can't have it all.
> Start a
> > test log, enter 3 or 4 Qs delete them and see if you get the same
> result
> > I did. If you don't it is something flaky about my install of
> WriteLog
> > (version 10.39C).
> >
> > 73 W0ETC
> >
> >
> > On Mon, 3 Mar 2003 22:09:50 -0500 "WA9ALS - John"
> <wa9als@starband.net>
> > writes:
> > > Someone posted a little while ago that the module incorrectly
> marks
> > > dupes.
> > > I don't think that's correct. If there are at least 3 QSOs
> > > separating the
> > > same callsign, it shows as a new station (correctly). However,
> it
> > > doesn't
> > > "pre-fill" as some would like.
> > >
> > > Whoever's getting the prefill, are you sure you're using the
> North
> > > American
> > > Sprint RTTY module?
> > >
> > > When you're testing this, be sure your radio is on and/or you
> are in
> > > a
> > > reasonable setup. Mine incorrectly marked dupes when my radio
> was
> > > off and
> > > the freq was unavailable.
> > >
> > > 73 - John, WA9ALS
> > >
> > >
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > >
> > >
> >
> >
>
>
>
>
|