Ty adding the following line to the [ports] section in writelog.ini :
CW_ON_PIN1=1
----- Original Message -----
From: "Doc - W5TB" <w5tb@arrl.net>
To: "WriteLog Reflector" <writelog@contesting.com>
Sent: Tuesday, March 11, 2003 17:18
Subject: [WriteLog] CW breaking up
I have writelog running on an old laptop p133 using the LPT port to send CW
to my Ten Tec Omni VI+ -- the problem is the cw 'breaks up' (that is not all
letters are sent completely) when sending messages with the F keys. If I
type slowly all letters are OK via the keyboard.
I've changed baud rate and about every setting I can in writelog to no
avail.
Anybody run into this sort of thing? Any clues?
Thanks in advance!
73 T.E. 'Doc' Drake, W5TB
Arlington, Texas
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|