> I started rttyrite, and set the port for com4. This is the problem. This
does not make rttyrite do ptt on Com4. What I had to do, is leave the
settings for LPT1 alone, and add that Com4 is a CW port in my Writelog port
setup, and contrary to my logic, have no port selected in Rttyrite.
This has to be a Rigblaster issue. I use COM2 for FSK and PTT, and COM2 is
set in the Rttyrite window. If I chose "None" in the Rttyrite window, my
rig is not keyed, as expected. My Ports Setup only has settings enabled for
rig control (freq/band/QSY).
I don't understand how you get rig keying without selecting a com port in
the Rttyrite window - unless you are doing that via rig control by
indicating so in the Port-Setup screen. - John
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|