My Final Report
I have decided to use version 10.48F untill this problem has been resolved. Have
also restored SP2 back on my machine.. If anyone finds a fix please let me know.
Thanks
--
73
Steve AI9T
http://www.ai9t.com
QSL via LOTW and EQsL
Steve AI9T wrote:
> I removed SP2 and that didn't fix the problem. I can load all but the latest
> versions and all works fine until I load 10.49d. When I load it writelog has a
> problem locating sound card program. I have 2 cards in my PC. Trying to remove
> and re-install one at a time to see if that will fix the problem.
>
> Thanks
> --
> 73
>
> Steve AI9T
>
> http://www.ai9t.com
>
> QSL via LOTW and EQsL
>
> K3SK wrote:
>
> > I'm having the same problem using Windows 2K service pack 4. I can't run
> > "RTTYRite" at all. Everytime I try to set up the sound board the program
> > crashes. I'm using the latest release of WriteLog, which is the 1st
> > release I've purchased.
> >
> > Dave
> >
> > -----Original Message-----
> > From: writelog-bounces@contesting.com
> > [mailto:writelog-bounces@contesting.com]On Behalf Of Robert Carroll
> > Sent: Saturday, October 02, 2004 8:45 PM
> > To: 'Steve AI9T'; 'Ron k5dj'; writelog@contesting.com
> > Subject: RE: [WriteLog] Writelog Problems
> >
> > Steve-
> >
> > This is the same problem I have been in communication with Ron about. I
> > cannot change modes without crashing the system. Depending on just what
> > sequence I use I can get the run time error you get or a "RTTYRite MFC has
> > encountered and error and must exit." Based on a request I have made for
> > info form others on the reflector who are experiencing this error, it
> > appears ALL have changed to SP2 just before seeing it. It's not certain yet
> > but I made a case to Ron that it seems very likely this is an issue that has
> > arisen because of SP2. In playing around here I have found exactly the same
> > behavior on 3 very different machines, all running SP2. Interestingly
> > enough I revived a 10.3 era package from 2002 I believe and it does not show
> > the behavior. The problem makes it very difficult to change to cw or to
> > change to different RTTY configurations, so I am hoping there will be a
> > solution soon. One workaround seems to be to wipe out the RITTY section of
> > the ini file, restart (probably reboot) and set up RTTTRite using AFSK. But
> > NEVER try to switch to another RITTY TTU type. You can switch to a TNC etc,
> > however. If you come up with a solution please let me know.
> >
> > Bob W2WG
> >
> > -----Original Message-----
> > From: writelog-bounces@contesting.com
> > [mailto:writelog-bounces@contesting.com] On Behalf Of Steve AI9T
> > Sent: Saturday, October 02, 2004 10:28 AM
> > To: Ron k5dj; writelog@contesting.com
> > Subject: [WriteLog] Writelog Problems
> >
> > I'm having a problem with 10.49d.
> >
> > I normally run writelog with the mmtty plugin and have been for some
> > time. Today I was going to switch over to CW mode. To do this I have to
> > click TU type and switch to soundboard afsk. Then I go to mode and
> > switch to CW. For some reason when I click soundbaord afsk I get a pop
> > up error with the path to
> >
> > Runtime error
> >
> > Program c:\ham\Writelog\Programs\RTTYRI~1.EXE
> > R6025
> > pure virtul function call
> >
> > When the pop up goes away the Rttyrite window goes away too
> >
> > I tried different ini files but doesn't seem to help. It has been awhile
> > since I used CW so I don't know when this might have started.
> >
> > I have loaded SP2 to XP PRO a few weeks ago
> >
> > I have attached my INI file for Ron
> >
> > T
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
>
> --
> 73
>
> Steve AI9T
>
> http://www.ai9t.com
>
> QSL via LOTW and EQsL
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
--
73
Steve AI9T
http://www.ai9t.com
QSL via LOTW and EQsL
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|