At 12:32 PM 9/30/2005, jduerbusch@charter.net wrote:
>No one has mentioned this so I will:
>
>In MMTTY in WriteLog you are using the plug-in and it may not have the
>same setup as the stand-alone version on your machine.
>
>What you want to check for, is to go to the MMTTY version while in
>WL. right click and go to options on the MMTTY plugin. Then to setup.
>
>Go to the TX menu tab and bring up the TX option screen.
>What you want to look for is the:
>"Char Wait" and "Diddle Wait" slide bar box.
>Make sure that the slide bar is all the way to the LEFT. Moving it to the
>right will cause the output character rate to slow down. This was for
>slow typest and was a feature on the UT-4B that was using with the ST-6.
>
>The other problem mentioned, the slow response going from TX to RCV is a
>different problem which has happened to me many times, but don't remember
>the fix.
It seems like I had to DECREASE the Priority on the Misc setup screen. (Or
was that to get the data to start sooner after PTT enabled?)
>Anyway this may help?
>
>Joe K0BX
>
>Stop the insanity!
>Please do not add me to any distribution lists (Joke, Stories or Junk)
>without my permission.
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
Jim Rhodes K0XU
jim@rhodesend.net
Experience is the thing you have left when everything else is gone.
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|