Tom, if it works ok with HRD, then maybe this will help.
In the Writelog.ini file, change the setting to:
9600, N, 8, instead of
9600, N, 8, 1 in other words leave off the stop bit but leave the comma.
That is what I had to do
Joe K0BX
Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk) without
my permission.
________________________________
From: Tom Shelton <gl1800winger@verizon.net>
To: writelog@contesting.com
Sent: Sat, November 19, 2011 12:21:43 AM
Subject: Re: [WriteLog] No Rig! problem (TS-2000)
So far, nothing I've tried has worked. I'm pretty tech savvy and I really
believe the problem is with the software.
I had high hopes for putting this program on the air for sweepstakes. I
really want to like it, and I'm sure I will when it works for me.
Downloaded N1MM for the weekend's contest support.
-----Original Message-----
From: Tom Shelton
Sent: Thursday, November 17, 2011 5:11 AM
To: writelog@contesting.com
Subject: Re: [WriteLog] No Rig! problem (TS-2000)
I made sure the settings were correct in the entry window.
A few other things I’ve tried:
Changing the data rates – no joy.
Changing the line in the setup window – no joy.
Swapping the location with the working IC-7200 – no joy.
I’ve done several full reloads of writelog – no joy.
Getting frustrated . . .
Tom, AB3IC
From: Jim Rhodes
Sent: Thursday, November 17, 2011 1:41 AM
To: Tom Shelton
Cc: writelog@contesting.com
Subject: Re: [WriteLog] No Rig! problem
You did set the frequency in that entry window to "rig on com 4" didn't you?
Jim K0XU Sent from my Xoom tablet
On Nov 16, 2011 6:52 PM, "Tom Shelton" <gl1800winger@verizon.net> wrote:
I last wrote to you about a few problems I was having. A couple of them I
figured out, but one is still a mystery to me.
I have a Kenwood TS-2000 using port 4 (9600, N, 8, 1). I’m using a
USB/Serial adapter here. In the entry window, the rig is showing as No Rig!
instead of the frequency and mode. I also have an IC-7200 using port 5 (same
as above). This rig shows up properly in the in the entry window.
I’ve verified both configs in the writelog.ini file.
Both radios work well with Ham Radio Deluxe.
I’d like to use the TS-2000 for the Sweepstakes this weekend, so having
the frequency is necessary for the log. Please help soon...
Tom Shelton, AB3IC
No electrons were harmed in the sending of this message, although several
were terribly inconvenienced.
Draco Dormiens Nunquam Titillandus
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|